labcon Eclipse™ 200 microLiter Graduated Pipet Tip, in Pagoda® Refills, Sterile, 1093-295-008-9
Additional Information about Labcon's Eclipse™ 200 Microliter Graduated Pipet Tip, in Pagoda® Refills, Sterile ACT Label
Manufacturing Impact Reduction
Labcon has made extensive efforts to reduce its energy, water and waste documented since 2008. Benchmarked to each case of product, Labcon shows a reduction in GHG emissions, water, energy, and waste since 2013.
Renewable Energy Use
Labcon has a large photovoltaic system to support and offset electricity from the grid to help produce its products. Output for the system can range anywhere from 800,000 kWh to up to 1.2 million kWh per year.
Responsible Chemical Management
Labcon has an internal policy and procedure to appropriately avoid employee exposure to hazardous chemistries. As part of the policy, hazardous chemistries are analyzed before they enter the manufacturing facility. This product is made of polypropylene and polyethylene. It does not contain any mutagens, carcinogens, or reproductive toxins at 95% by weight.
Shipping Impact
Labcon's products are made in Petaluma, California in the United States.
Product Content
Labcon uses regrind internal scrap material to create some of their product. Up to 8% of the total percent by weight of this product is made out of reused materials.
Packaging Content
There is up to 38% recycled content in the packaging materials on a percent by weight basis for this product.
Energy Consumption
This product does not consume energy.
Water Consumption
This product does not consume water.
Lifetime Rating
Labcon’s tips are made for one-time use. However, the racks and tops that hold the tips may be reused multiple times.
Packaging End-of-Life
Over 90% by weight of the packaging of this product is cardboard which is readily recyclable in over 60% of the U.S. infrastructure. Shrink wrap can be recyclable, but it is not readily recyclable in every area. Labcon provides further education to customers on the recyclability of these materials. Please follow your organization's recycling protocols to dispose of these materials properly.
Product End-of-Life
Tips are generally disposed of in a landfill or follow specific waste disposal protocols. The materials that hold the tips, however, could be recycled. Please follow the waste guidelines of your organization to properly dispose of each material within this product.
Labcon has made extensive efforts to reduce its energy, water and waste documented since 2008. Benchmarked to each case of product, Labcon shows a reduction in GHG emissions, water, energy, and waste since 2013.
Renewable Energy Use
Labcon has a large photovoltaic system to support and offset electricity from the grid to help produce its products. Output for the system can range anywhere from 800,000 kWh to up to 1.2 million kWh per year.
Responsible Chemical Management
Labcon has an internal policy and procedure to appropriately avoid employee exposure to hazardous chemistries. As part of the policy, hazardous chemistries are analyzed before they enter the manufacturing facility. This product is made of polypropylene and polyethylene. It does not contain any mutagens, carcinogens, or reproductive toxins at 95% by weight.
Shipping Impact
Labcon's products are made in Petaluma, California in the United States.
Product Content
Labcon uses regrind internal scrap material to create some of their product. Up to 8% of the total percent by weight of this product is made out of reused materials.
Packaging Content
There is up to 38% recycled content in the packaging materials on a percent by weight basis for this product.
Energy Consumption
This product does not consume energy.
Water Consumption
This product does not consume water.
Lifetime Rating
Labcon’s tips are made for one-time use. However, the racks and tops that hold the tips may be reused multiple times.
Packaging End-of-Life
Over 90% by weight of the packaging of this product is cardboard which is readily recyclable in over 60% of the U.S. infrastructure. Shrink wrap can be recyclable, but it is not readily recyclable in every area. Labcon provides further education to customers on the recyclability of these materials. Please follow your organization's recycling protocols to dispose of these materials properly.
Product End-of-Life
Tips are generally disposed of in a landfill or follow specific waste disposal protocols. The materials that hold the tips, however, could be recycled. Please follow the waste guidelines of your organization to properly dispose of each material within this product.